XAK® MARK-1
$75.00
FEEL WHAT YOU BECOME®
DESCRIPTION
After years of outperforming expectations in the AR trigger market, HIPERFIRE has done it again, but this time with the AK platform. The AK platform is easily the second most popular MSR platform in the United States next to the AR. The AK is know the world over for its versatility, durability, and ability to operate in extreme conditions; the AK platform was the obvious choice for our next set of innovations. We are proud to introduce our new XAK M series trigger family. We took the same materials, heat treatment, precision manufacturing, and innovative designs that have proven themselves over the years in our AR products, and introduced them into this new family of triggers. We know you won't be disappointed. Traditional AK triggers are heavy with a TON of creep, and the reset leaves a lot to be desired. So why not upgrade to the brand that truly delivers? It doesn't matter if your AK sees random days at the range, tactical/duty use, competition, or only something to show off to your buddies, our new family of triggers are the best choice available for any AK. Please see the Application section below to view notes on which platforms our XAK M series triggers will fit.HIGHLIGHTS
- Single-Stage AK trigger
- Short 2+ lbs. pull weight (depending on user supplied spring selection)
- Clean, effortless break
- Short, strong reset
FEATURES
- Improved single-stage "creep" or pre-travel
- Lightened trigger pull weight through precision manufacturing and design, and lower friction coefficient (less drag)
- Curved trigger bow allows for the addition of our patented HIPERSHOE® (sold separately on our accessories page)
- Black, Mil-grade Parkerize coating for longevity
- Application: XAK M series triggers are designed to fit Morrissey stamped AK47 and AK74 variants such as Palmetto State Armory AK and AKV. Our XAK M series triggers may work in additional variants, however, HIPERFIRE cannot guarantee proper fit and function in other platforms. As any true AK enthusiast knows, every AK is different and there is no way to guarantee which receivers a trigger will fit. HIPERFIRE has 2 different variants of AK triggers (M and T series) that cover the vast majority of AK platforms. We also make an adjustable safety selector to cover everything in between. As always, we are here to assist, so if you have questions please contact us. Please read HIPERFIRE's Returns Policy for more information. We cannot make refunds or take returns on triggers that have been modified, unless you are instructed to do so by HIPERFIRE staff. We advise contacting us with questions prior to any modifications for fitment. Aftermarket safety selectors may or may not work and function with this application as well.
- Trigger Type: Single-Stage, Semi-Drop-In
- Pull Weight: 2+ pounds depending on user supplied spring
- User Adjustable: Yes, depending on user supplied spring
- Trigger Bow: Curved, with HIPERSHOE available (sold separately)
- Finish: Black, Heavy Maganese Phosphate (mil-grade parkerizing)
- Companion Products: HIPERFIRE AK Pins and Safety Selector
HIPERTOUCH® Competition: “I picked up a Hyperfire [sic] from a prize table at a 3 Gun match. I installed it in my DPMS 308 that I use for 3 Gun in place of the JP trigger that was in it. What a difference. – The JP let off at 4.25 lbs and was clean and crisp. But in spite of the heavy-for-3 Gun pull, I had issues with it not setting off some ammo. Surplus ammo was the worst with about an 75% fire rate. Even Hornady Steel Match wouldn’t go bang. Actually none of the Hornady SM rounds would go off. They would fire in my M700 Remington however so it had to be a rifle issue. – After changing out the JP for the Hyperfire [sic], every round of every ammo tested fired. Surplus MG ammo that I had pulled from links even fired 100%. And no more issues with Hornady SM. Surprisingly, this ammo was now firing in a rifle with a less than 2# trigger pull. This is with the lightest (silver) coil springs installed. And because of that, my accuracy has improved. – I was so impressed, I bought two more Hyperfires [sic]. One is in my Tac Optics rifle and one in my Tac Irons rifle. – The Hyperfire [sic] has more take up than the JP and several other triggers I have tried. But when shooting rapidly, as is often done in competition, I tend to let off more than necessary to reset. For me, an AR trigger like the very short take-up/reset AR Gold trigger isn’t really a benefit. – I will continue to use the JP triggers I have in some other working and fun rifles because they are reliable and do the job. And since I am not sponsored by anyone and have to pay for my own equipment, I have to budget for those parts I want and spend wisely. But if I build any more competition rifles, especially ones that might be used in rapid fire, they will have Hyperfire [sic] triggers in them.”
HIPERTOUCH® Competition: “I can’t thank you enough for introducing me to the HiperFire triggers. As a professional shooter, the search for the perfect trigger feel and performance is difficult. I have run both the 24 and the 24C in matches and I have finally found my trigger!”
