GALIL Curved
$139.00
Out of stock
FEEL WHAT YOU BECOME®
Coming Spring 2025...
DESCRIPTION
After years of outperforming expectations in the AR trigger market, and following that up with our AK line of triggers, HIPERFIRE has now become the first aftermarket trigger company to make a Galil specific trigger that does not need to be modified to work. The Galil family features the trigger tab found in our XAK T-series triggers (T1, T2, and T3) to accommodate the larger gap between the safety and the rear of the trigger for most AKs. The Galil has tighter tolerance than AK variants, so we were able to shorten the sear for a better trigger squeeze and improve performance. Galil triggers come with proprietary cuts to work in the 7.62x39, 5.56 NATO, and 5.45x39 Galil Ace Gen 1 and Gen 2 models.HIGHLIGHTS
- Single-Stage Trigger for All Gen 1 and Gen 2 IWI Galil Ace Models EXCEPT Large Frame 7.62x51 NATO Models
- Trigger and Hammer are trimmed and fitted for the various Galil ACE Gen 1&2 models
- Short 2+ lbs. pull weight (depending on user supplied spring selection)
- Clean, effortless break
- Short, positive reset
FEATURES
- Improved single-stage pre-travel, a.k.a. "creep"
- Lightened trigger pull weight through precision manufacturing and design, and lower friction coefficient (less drag)
- Curved trigger bow allows for the addition of our patented HIPERSHOE® (sold separately on our accessories page)
- Black, Mil-grade Parkerize coating for longevity
- Application: The new Galil (tabbed) series triggers are designed to fit Galil ACE Gen 1 and Gen 2, 5.56 NATO, 7.62x39, and 5.45x39 variants. These triggers will not work in the large frame 7.62x51 NATO variants. As always, we are here to assist, so if you have questions please contact us. Please read HIPERFIRE's Returns Policy for more information. We cannot make refunds or take returns on triggers that have been modified, unless you are instructed to do so by HIPERFIRE staff. We advise contacting us with questions prior to any modifications for fitment. Aftermarket safety selectors may or may not work and function with this application as well.
- Trigger Type: Single-Stage, Semi-Drop-In
- Pull Weight: 2+ pounds depending on user supplied spring
- User Adjustable: Yes, depending on user supplied spring
- Trigger Bow: Curved, with HIPERSHOE available (sold separately)
- Finish: Black, Heavy Maganese Phosphate (mil-grade parkerizing)
- Companion Products: HIPERFIRE AK Pins, HIPERCOMP Compensator, and HIPERSHOE
HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”
HIPERTOUCH Genesis: “A friend of mine and I ordered a couple of these triggers a few years back, this is the best single stage AR trigger I have ever used. I had used Timney triggers for years; not anymore. I now own 7 AR rifles with the HIPERFIRE Genesis. I will now use nothing else in my AR builds, they give you so much adjustment and versatility. Between my friends and I we have 22 of these triggers all together. We are sold on this product and so are about 10,000 prairie dogs. Thank you for making a fantastic easy to install product.”
