GALIL Flat
$139.00
Out of stock
Coming Spring 2025...
DESCRIPTION
After years of outperforming expectations in the AR trigger market, and following that up with our AK line of triggers, HIPERFIRE has now become the first aftermarket trigger company to make a Galil specific trigger that does not need to be modified to work. The Galil family features the trigger tab found in our XAK T-series triggers (T1, T2, and T3) to accommodate the larger gap between the safety and the rear of the trigger for most AKs. The Galil has tighter tolerance than AK variants, so we were able to shorten the sear for a better trigger squeeze and improve performance. Galil triggers come with proprietary cuts to work in the 7.62x39, 5.56 NATO, and 5.45x39 Galil Ace Gen 1 and Gen 2 models.HIGHLIGHTS
- Single-Stage Trigger for All Gen 1 and Gen 2 IWI Galil Ace Models EXCEPT Large Frame 7.62x51 NATO Models
- Trigger and Hammer are trimmed and fitted for the various Galil ACE Gen 1&2 models
- Short 2+ lbs. pull weight (depending on user supplied spring selection)
- Clean, effortless break
- Short, positive reset
FEATURES
- Improved single-stage pre-travel, a.k.a. "creep"
- Lightened trigger pull weight through precision manufacturing and design, and lower friction coefficient (less drag)
- Flat trigger bow allows for the addition of our patented HIPERSHOE® (sold separately on our accessories page)
- Black, Mil-grade Parkerize coating for longevity
- Application: The new Galil (tabbed) series triggers are designed to fit Galil ACE Gen 1 and Gen 2, 5.56 NATO, 7.62x39, and 5.45x39 variants. These triggers will not work in the large frame 7.62x51 NATO variants. As always, we are here to assist, so if you have questions please contact us. Please read HIPERFIRE's Returns Policy for more information. We cannot make refunds or take returns on triggers that have been modified, unless you are instructed to do so by HIPERFIRE staff. We advise contacting us with questions prior to any modifications for fitment. Aftermarket safety selectors may or may not work and function with this application as well.
- Trigger Type: Single-Stage, Semi-Drop-In
- Pull Weight: 2+ pounds depending on user supplied spring, adjustable with HIPERSHOE
- User Adjustable: Yes, depending on user supplied spring
- Trigger Bow: Flat with HIPERSHOE available (sold separately)
- Finish: Black, Heavy Maganese Phosphate (mil-grade parkerizing)
- Companion Products: HIPERFIRE AK Pins, HIPERCOMP compensators, and HIPERSHOE
EDT Designated Marksman: “Yo’ll are on top of things. Got the EDT Designated Marksman this morning and put it through hell. I’m x-military and this is a far better trigger group than the standard milspec. Im rough on firearms and my way of looking at things is if it cain’t take abuse I don’t need it. This trigger group can take it. Very nice feel and action. In case someone out there is wondering, this trigger group will fit and work in the colt ar 9mm and the stag arms 9mm carbines but the safety has to be removed in order to install it in the stag arms 9mm then reinstalled.”
HIPERTOUCH® Genesis: “HIPERFIRE has taken triggers to an entirely new level – a drastic improvement over a Mil-Spec trigger and more importantly – the HIPERTOUCH Genesis trigger systems are giving the top names in triggers a serious run for their money! Unlike their competition the HIPERTOUCH Genesis trigger system provides higher hammer fall energy for more consistent and reliable primer strikes – even with .22 rimfire conversion kits and the entire system is easily user configurable for different trigger pull weights! Here is where the magic lies – the HIPERTOUCH Genesis trigger system is an amalgamation of ‘old school’ and ‘new school’ designs providing an extremely smooth, light weight, consistent trigger pull with minimal creep and an extremely quick trigger reset. Rapid split times and minimal gun movement are easily accomplished with the HIPERTOUCH Genesis system. The ‘old school’ part of the design will look and feel very similar to anyone familiar with the standard fire control mechanism of an AR platform rifle. The trigger, disconnector and the hammer assembly look familiar but with some modifications. The trigger and hammer springs are standard wire springs. When these old school parts assemble into a lower receiver you get a really crisp trigger with an excellent pull. In fact – most people would be thrilled to have a trigger of this quality! – BUT – 1/3 of the parts aren’t installed yet! … Here is where HIPERFIRE has integrated the ‘new school’ into the design. The HIPERTOUCH Genesis has added additional parts to its fire control system that dramatically improve an already excellent trigger pull. The additional components provide for an even smoother, lighter and more consistent trigger pull via the use of a matched pair of coil springs held in place by guide rods. The springs and rods connect to the hammer allowing a progressively increasing hammer fall force as the springs decompress. The use of the additional springs to increase hammer fall force has enabled HIPERFIRE to maximize the trigger geometry to create an unbelievably smooth, light trigger pull.”
