Yes. HIPERTOUCH® triggers have the hardest hammer fall energy of any AR15, AR10 type rifle hammer on the market when the Blue toggle springs are installed. HIPERTOUCH® systems are the ideal fire control for use in 22 long rifle chambered ARs.
See Will the FCG detonate 5.45×39?
Terry Bender is HIPERFIRE®'s CEO and runs R&D. He has over 40 years of experience in product and manufacturing process development, private consulting in forensics, failure analysis, and remediation using computational analytic tools. He began designing a firearm about 20 years ago as a personal curiosity. The rest is history.
Hiperfire’s FCGs will work with any lower receiver that has a Mil-Spec cavity. View the “MIL-spec” cavity drawing, AR10 & AR15 Fire-Control Cavities, that shows the spec that the HIPERTOUCH® FCGs were designed to. Lower receivers that have that cavity, open and unobstructed, will receive the FCG’s without any problems.
Terry Bender is HIPERFIRE®'s CEO and runs R&D. He has over 40 years of experience in product and manufacturing process development, private consulting in forensics, failure analysis, and remediation using computational analytic tools. He began designing a firearm about 20 years ago as a personal curiosity. The rest is history.
No. When everything is installed correctly, the lowest weight of the 24 is roughly 2½ pounds. Likewise the 24E and 24C both have a lowest weight of 2¾ pounds.
Having hammer springs installed backwards or toggle springs installed incorrectly will contribute to trigger weights lower than 2 pounds, but trigger performance will be degraded in some other way like primer light strikes, gritty trigger pull, etc.
Terry Bender is HIPERFIRE®'s CEO and runs R&D. He has over 40 years of experience in product and manufacturing process development, private consulting in forensics, failure analysis, and remediation using computational analytic tools. He began designing a firearm about 20 years ago as a personal curiosity. The rest is history.
The trigger will not burst. But, shooters will burst.
Here are the only two real examples of real people running HIPERTOUCH triggers that burst that HIPERFIRE is aware of:
Know you’re equipment. All of it. The trigger is just a component of a system that includes the shooter. Just because a shooter experiences this does not mean the problem is the trigger. Maybe it’s the shooter and the ill advised choices he/she has made. If you’re new to high performance rifles of any stripe, don’t operate in a vacuum. Consult those with experience before you attempt something you may not be prepared to handle.
Terry Bender is HIPERFIRE®'s CEO and runs R&D. He has over 40 years of experience in product and manufacturing process development, private consulting in forensics, failure analysis, and remediation using computational analytic tools. He began designing a firearm about 20 years ago as a personal curiosity. The rest is history.
Yes, reports of trigger “doubling” have come to HIPERFIRE®, but in all cases they were really bump fires. True doubling or bursting occurrences are very rare with any fire control and can indicate faulty installation, wear, debris lodged in the trigger due to poor maintenance, manufacture, etc.
If the trigger’s design or manufacture is flawed, once it “doubles” it will always double. If the doubling is inconsistent, the issue may not be with the fire control at all, but rather the way that the shooter is using the fire control. Ensuring that the user is pulling the trigger all the way through break to complete over travel, maintaining a firm hold on the pistol grip during the rifle’s recoil onto and rebound off of the shoulder, increasing the pull weight of the trigger, etc. are all effective ways to maximize shooter control thereby minimizing or eliminating bump fires.
Terry Bender is HIPERFIRE®'s CEO and runs R&D. He has over 40 years of experience in product and manufacturing process development, private consulting in forensics, failure analysis, and remediation using computational analytic tools. He began designing a firearm about 20 years ago as a personal curiosity. The rest is history.
After-market anti-walk and anti-rotation pins can produce variations in pull weight from what HIPERFIRE® specifies, a grittier feel, and/or alter the FCG’s overall performance, like reducing hammer fall energy, providing an inferior user experience.
HIPERFIRE® recommends that users first install the MIL-spec pins that come with the packaged HIPERTOUCH® product to baseline their experience for comparison’s sake and then make the decision as to whether other pins might be preferred for reasons like aesthetics, etc.
Terry Bender is HIPERFIRE®'s CEO and runs R&D. He has over 40 years of experience in product and manufacturing process development, private consulting in forensics, failure analysis, and remediation using computational analytic tools. He began designing a firearm about 20 years ago as a personal curiosity. The rest is history.
We recommend the MIL_spec pins included with the product. Users have contacted HIPERFIRE® regarding hammer fall and pull weight issues with the use of various anti-rotation pin products. In some cases:
In these cases, HIPERFIRE® recommends taking out the anti-rotation (anti-walk) pins and install the pins supplied with the HIPERTOUCH® trigger to baseline optimal performance. After knowing how the FCG should work as designed and most importantly how it should feel, the user can then try other pins for comparison. If the others work out okay, go ahead and use them. If not, abandon them and go back to the pins supplied in the HIPERTOUCH® package.
Terry Bender is HIPERFIRE®'s CEO and runs R&D. He has over 40 years of experience in product and manufacturing process development, private consulting in forensics, failure analysis, and remediation using computational analytic tools. He began designing a firearm about 20 years ago as a personal curiosity. The rest is history.
No, the FCG’s (Fire Control Group) trigger weights cannot be adjusted to 4½ pounds and greater on these models. FCG trigger weights are more or less the same between all three models and range as follows based on toggle spring pair used:
Terry Bender is HIPERFIRE®'s CEO and runs R&D. He has over 40 years of experience in product and manufacturing process development, private consulting in forensics, failure analysis, and remediation using computational analytic tools. He began designing a firearm about 20 years ago as a personal curiosity. The rest is history.
No, they are not the same. Here’s the main difference between the 24C & 24E, other than trigger shape.
The 24E’s initial creep is very short, some say a “hint of creep,” with subsequent shots exhibiting a little less creep if trigger let-off is stopped at hammer reset and the follow-up shot is made from there.
However, on the 24C, the initial creep is virtually zero, i.e. it creeps, but most shooters can’t feel it. And, regardless of finger control during reset, subsequent shots are identical in feel to the first shot, resulting in optimal feel consistency and trigger transparency. Trigger transparency means that the shooter now can simply think “shoot” and the rifle fires instead of being over conscious about the feel and mechanics of pulling the trigger, which is a distraction to shooting resulting in poor timing and poor accuracy. The reason no one likes MIL-spec triggers is that you can’t keep from thinking how terrible it feels. That’s not transparency.
Terry Bender is HIPERFIRE®'s CEO and runs R&D. He has over 40 years of experience in product and manufacturing process development, private consulting in forensics, failure analysis, and remediation using computational analytic tools. He began designing a firearm about 20 years ago as a personal curiosity. The rest is history.
Send us a dealer request through the CONTACT page at hiperfire.com! Once we receive your request, we can send you dealer documents with dealer pricing and dealer discounts, MAP and MSP conditions, etc.
Hiperfire.com requires all authorized dealers to fill out a dealer application and provide documentation from a governmental entity (validating the business, like a – retail sales permit, state sales tax certificate, Federal firearm license, etc.). Once your application and governmental entity documents have been received and approved, you only have to place your initial order to open your HIPERFIRE® dealership.
Terry Bender is HIPERFIRE®'s CEO and runs R&D. He has over 40 years of experience in product and manufacturing process development, private consulting in forensics, failure analysis, and remediation using computational analytic tools. He began designing a firearm about 20 years ago as a personal curiosity. The rest is history.
